A Quality Product from
Sunny Steel Enterprise Ltd. [View Profile]
Shanghai - China
Welding Neck Flanges:
The welding neck flange is normally referred to as the "high hub" Flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the Flange. The welding neck flange is the best designed butt-welded flange of those currently available because of its inherent structural value. It is expensive because of the design.
Threaded (Screwed) Flanges:
The threaded flange is similar to the slip-on flange, but the bore is threaded. Its chief merit is that it can be assembled without welding, explaining its use in low pressure services at ordinary atmospheric temperatures and in highly explosive areas where welding create a hazard.
The slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-on flanges are all bored slightly larger that the O.D. of the matching pipe. They are preferred over welding neck flanges by many users due to their lower initial cost, but final installation cost is probably not much less than that of the welding neck flange because of the additional welding involved.
Lap joint Flanges:
The lap joint flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange race. This radius is necessary to have the flange accommodate a lap joint stub end. Normally, a lap joint flange and a lap joint stub end are mated together in an assembly system.
The blind flange is a flange without a bore. It is used to close off the ends of a piping system and/or a pressure vessel opening. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened.
Socket Welding Flanges:
The socket welding flange is similar to a slip-on flange except it has a bore and a counter bore dimension. The counter bore is slightly lager than the O.D. of the matching pipe, allowing the pipe to be inserted into the flange similar to a slip-on flange. The diameter of the smaller bore is the same as the I.D. of the matching pipe. A restriction is built into the bottom of the bore which sets as a shoulder for the pipe to rest on. This eliminates any restriction in flow when using a socket welding flange.
Product Applications :
Standard:JB/T81 GB/T9112-9124, HJ20592-20635, SH3406, ANSIB16.5 JISB2220.
Pressure class (Mpa): 0.25--50
Material:Carbon steel(WPB A234), alloy steel,stainless steel
Terms and Conditions :
Fit for sea shipment packing and customer's requirement. Wooden box
View Complete Catalog
Sunny Steel Enterprise Ltd. Is a professional steel exporter in China, We specialize in the production of steel product, including stainless steel, galvanized steel, pre-painted steel and carbon steel sheet, ceramic lined composite steel pipe and fittings, elbow, plate, coil and the related products, covering pipe & tube , fitting, bar and wire rod etc. Based on the standing better and faster service，we have been the best partner both of the steel factories and suppliers. We offer perfect service to the mills and bring in the highest quality levels at the most competitive price for our customers. Our entire operations are focused on the precise demands of our customers needs.
The high quality Tie Rod Ends performs the role of coupler in the steering linkage with efficacy and smoothness. We are leading manufacturer and exporter of high quality tie rod en ....
The high quality Tie Rod Ends/Ball Joints performs the role of coupler in the steering linkage with efficacy and smoothness. We are leading manufacturer and exporter of high qualit ....
Welding Neck Flanges: The welding neck flange is normally referred to as the "high hub" Flange. It is designed to transfer stresses to the pipe, thereby reducing high stress conce ....
A flange allows two pipes to be mechanically connected together, or a pipe to be mechanically connected to a valve, tee, choke or other piece of equipment. The principle of a f ....
Stainless Steel Flanges • Pipe Flanges • Butt Weld Pipe Fittings • Pipe Elbows • Stainless Steel Pipe Fittings ....
150 Lbs upto 8" All types 300 Lbs upto 6" All types 600 Lbs upto 4" All types 900 Lbs upto 3" All types 1500 Lbs upto 3" All types Flanges as per British Standard BS 4504 D ....
Flanges as per DIN Standard DIN 2527 NW 10-NW 200 (PN10,PN16,PN25,PN40) DIN 2576 NW 10-NW 200 DIN 2632 NW 10-NW 200 DIN 2633 NW 10-NW 200 DIN 2635 NW 10-NW 150 DIN 2642 NW ....
We Deal In Elbow, Bends, Stibend, Bolt & Nuts, Screws, Tees, Valves, Ball Valves, Reducer, Flanges ' D, E, F, H Tables ' & ASA 150#, ASA 300 in AISI 304, 316 Grade & also Blind Fla ....
Forged and Plate Flanges such as Slip on, Socket weld ....
Technical specification: --Bending moment: max.5kN/m --Cutting action : max 11.0kN --Bending: max1/500 --Live load (Bending Stiffness): max 500kN/m2 --Weight per running m ....