1001 Rakshak Exterior Wall Paint (Exterior Wall Finishing)

A Quality Product from
Sant Ram Nikka Mal [View Profile]
Delhi - India

Description :
The old surface must be free from loose particles, dust, grease, chalked and flaked one, fungus and algae or moss from previous paintings. Cleaning the surface after wire brush or sanding must follow proper water jetting and allow the same dry before the paintings commence. For filling of cracks and leveling use plastic of paris only but, not oil putty is recommended. Apply two coats of Rakshak 1001 by thinning one part of paint to half part of water, giving time interval of 4 to 6 hours between coats. To ensure better results and sound protection for horizontal surfaces like window tops, sunshades, and ledges, three (3) finishing coats are recommended. For new plastered cemented surface, maturing and curing time will be minimum three months, before priming and finishing follows.

Thinning : Water

Uses : Cementous, asbestos & brickwork, plastered surfaces.

Covering Capacity : 10 - 12 sq mtr per Kg

Drying Time : 4 - 6 hrs

Color Range : As per glossy weatherite shade card.

Packing : 20 kg , 5kg & 1 kg

Highlights : Exterior & Interior coating

Shelf Life : 12 months

Flash Point : Above 38?C

Undercoats : On prepared surface

Directions of Use : Surface must be free from dirt, chalk, fungus, mildew, algae and loose old paint particles. If excessive fungus growth is covered and sintered on walls that must be removed with glossy antifungal solution before painting commences.The old surface must be free from loose particles, dust, grease, chalked and flaked one, fungus and algae or moss from previous paintings. Cleaning the surface after wire brush or sanding must follow proper water jetting and allow the same dry before the paintings commence. For filling of cracks and leveling use plastic of paris only but, not oil putty is recommended. Apply two coats of Rakshak 1001 by thinning one part of paint to half part of water, giving time interval of 4 to 6 hours between coats. To ensure better results and sound protection for horizontal surfaces like window tops, sunshades, and ledges, three (3) finishing coats are recommended. For new plastered cemented surface, maturing and curing time will be minimum three months, before priming and finishing follows.

Product Applications :
Brush, spray or roller

Cementous, asbestos & brickwork, plastered surfaces.


View Complete Catalog

Sant Ram Nikka Mal

Industrial paints manufacturers. Our products: Shade Card - Enamels, Acrylic Washable Distemper, Dry Distemper, Acrylic Emulsion, Autoking, Glossy Cem, Glossy Tex, Hammertone.